2026 Exmark Radius E-Series Exmark LC2P77F

Discover the Exmark Radius E-Series Mower

With the performance you expect from Exmark, new features and a fresh new look, the Radius E-Series is the right choice for home and acreage owners looking for a commercial-grade mower without breaking the bank. Choose from 48-, 54-, or 60-inch Exmark Series 2+ cutting decks and a wide range of available accessories for maximum versatility. And with new Kawasaki V-twin engine options, Radius E-Series models deliver more performance per dollar than ever before.

Equipment
UPC: 193308225326
Onboard intelligence: None
Starter: Electric
Steering control: Hydraulically dampened twin levers adjustable both fore and aft; also has 2-position height adjustment
Caster forks: 0.375 in. thick caster yoke arms
Front caster tires: 13 x 6.5-6, smooth tread, pneumatic; bushings
Drive tires: 22 x 9.5-12 Super Turf TL
Parking brake: Lever-actuated pawl brake
Tractor frame: Unibody, welded, heavy-duty 2 in. x 3 in. rectangular tubular steel
Blade spindles: No maintenance, sealed and non-greasable spindles; 7.30 in. diameter cutter housing contains 17 mm (0.67 in.) diameter spindle shaft and hex blade drive
Cup holder: Yes
Electrical: 12-volt battery with 15-amp alternator
Standard features: Engine hour meter, cup holder, tow hitch and jack receiver
Seat: High-back seat with foam-padded seat cushion, armrests and integral safety switch
Power Components
Transmission speeds: Infinitely variable
Transmission brand: Hydro-Gear
Engine brand: Exmark
Engine model: LC2P77F
Engine displacement: 708
Speed: Infinitely variable speed selection from 0–8.0 mph forward, 0–5.0 mph reverse
Transmission: Hydrostatic
Engine series: V-Twin
Fuel system: Carbureted
Drive: Hydro-Drive
Engine spec: K5045
Engine speed: 3,600 rpm
Fuel capacity: 7-gallon single fuel tank with single fill location
Air filter: Standard engine manufacturer’s air filter
Drive description: Dual Hydro-Gear ZT2800 hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters
Fuel type: Gas carbureted
PTO engagement: MagStop electromagnetic 125-ft-lb clutch
Drive system: Hydro-Drive
Drive wheel release: Allows unit movement without engine running
Fuel indicator: Translucent visual
Deck lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles or place in transport position
Carb compliant: No
Safety package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators
ROPS: 2-post foldable ROPS standard with seat belt and latch
Decks
Deck style: Floating deck
Deck style description: Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch
Width / cutting deck: 48 in.
Deck construction: 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt
Cutting heights: 1.5" to 5.0" in 0.25" increments
Blade tip speed: Approximately 18,500 fpm
Bag capacity: N/A
Blades: 2 blades at 24.5" length
Dimensions
Width: 61 in.
Height: 69.7 in.
Curb Weight: 849 lb.
Length: 82.9 in.
Features
Adjustable Rollover Protection System (ROPS): New square tubing rollover protection system (ROPS) is easily foldable for storage.
Height of Cut Made Easy: Exmark's patented cut height adjustment system is very easy to use, enabling the user to quickly set height of cut with unmatched accuracy, right from the operator seat.
High-Strength Steel Frame: Fabricated and fully welded of high-strength rectangular steel tubing, the Radius frame places the heaviest components -- engine, transmission and fuel tank -- low and centralized in the frame. This lowers the machine's ce